Engines are built / completed on a customer order individual basis only.
NOT MASS PRODUCED !
Attention to detail & individual requirements are met & kept in this fashion.
Listing below of example engines;
All have new: REBUILD COMPONENTS
Ex: HVoil pump, rings, all bearings, cam shaft, lifters, pistons, wrist pins, true roller timing set, valve springs, valve keepers/locks, oem balancer, new rod bolts, premium gaskets & seals
New valves, o/p drive shaft.
Machining included –
head surfaceCrank grind / polish
Bored & honed, resize rods, 3 angle grindmin.
line checked, mag check all.
ALL REQUIRED MACHINING
COMPLETE ENGINE LONG BLOCK ASSY
No starter, intake/carb, distributor, flywheel, accessory components included.
Included in level one group : to 350 HP
CHEV -283-350
FORD -289-351w
DODGE -318-360
340 Dodge/302 Chev NOT included in level one group !
core charge
International Money Orders accepted with 80 % deposit
===========================================
Performance & Race Engines !
Level Two Engines
Oem Performance Level Two
Engines inlevel two come with all rebuild parts of level one but have Forged pistons & are balanced/degree Incam, machined true roller timing set, Clevite bearing set, performance oil pump/pick up , solid or hyd cam & lifters, new rockers/shafts, springs to .600 lift. s/s valves oem factory steel con rods. All relating parts to Level Two will be used here. Any aftermarket cranks, heads etc – subject to additional charge. NON fact roller blks.
Core charge applies to:Chev-302- Large blocks
Dodge- 340 – 383 – 440 . No Hemi .ALL LEVEL TWO Engines subject to core/parts availability.
LEVEL THREE ENGINES
All components of level two plus new aluminium intake and roller rockers/shafts,
With c/moly push rods and SFI rated flexplate and balancer with ARP fasteners head/main/rod bolts. With same applicable engine group.
LEVEL FOUR ENGINE BUILD
Level three application plus new iron heads
And 700hp rated cast steel crankshaft, Manley H-Beam con rods. Level four engines included – non modified block/stroker assemblies. SFI rated balancer and flex plate. Some new iron heads – not always available/special order only. Available Iron heads will be used and price adjusted accordingly
DODGECHEVROLETPONTIACFORD
Level Five ENGINE Build !
All applications of level four – with Holley or Demon carb, electronic street totrack distributor, wire set, mechanical fuel pump, new water pump.
Level one through level five engines are warranted for one year. Allwarranty approvals are subject toFlying J Automotives inspection of engine when warranty is requested.
oem steel crank, x or o rods, iron oem heads (extensively ported) or 200cc new heads, screw in studs, guide plates, melling race o/p, single springs to .600”, with new stealth intake and level three components. Just add your carb, dist and other bolt on accessories and you are done.
This 0 tech maintenance (other than set-up & oil changes/tuning)engine will be a hassle free hp
377ci –605hp – Block is oem 4 bolt, studded mains, steel crank, Manley H-beam rods, Diamond forged pistons, alum. 220 heads, solid roller cam package, new racing pan/pu/pump. Complete from pan to intake including SFI balancer and flex plate.
468ci – 665hp – Block is oem 4 bolt studded mains, steel crank, Manley H-beam rods, Diamond forged pistons, iron o/p heads, solid valve train, dual springs to .700”, racing pan/pu/pump, Victor intake, complete from pan toint.
--------------------------------------------
540 ci – 750 + hp-This engine is all new from pan up including oem 4 bolt 10.2 iron block. Finest components throughout.Level 5 componentsincluding 4500 series Team G intake. Also has steel 1000hp rated con rods, solid roller cam, rev kit, stud girdle, roller rocker arms, up to 15:1 compression ratio with iron 360+ cc heads and tall chrome/steel valve covers. Complete long block assy.
Best of components. New block, 4340 crank, h-beam rods, racing oil pump/components, alum 360 cc + heads, complete 871 supercharger assy, solid roller valve train and related parts. This combination can be a passively tuned/under driven 600 hp or overdriven 950 + hp tuned potential. Including SFI balancer, high torque starter, new water pump, 750 cfm Edelbrock carbs (pair) and flex plate.
632 ci 930 hp/790 tq : This engine is all new from pan up including Dart block. Finest components throughout. Alum 400cc heads, 10:1 cr, Holley dominator carb, alum race intake, SFI flex plate and balancer, 4340 steel rods. This is also a turn key drop in assembly.
Racing Component Upgrades - Profiler Heads, Alum RODS, Billet Block etc.
DODGE MOPAR PERFORMANCE
340 oem Build : Customer supplied core. All level three components. Can upgrade to solid valve train @ no additional cost 400 hp potential.
426 HEMI – 465 + HPAll new !
500 ci B1 – 930 HPEntry level 15:1 cr – solid roller valve train. Best of components.
FORD
All combinations available : From 289 to 557 ci. Stoker combinations. Supercharger builds w/wo nitrous applications
For More Information on These Listed Engines & Others contact Contact
International Money Orders accepted !
Open your own freePayPal account for safe easy payment transactions online;
Oem 400 ci – 455 ci400hp-Forged pistons, block bored/honed, Level Two components & options
Performance build to 500 hp Level fouroptions with Edelbrock Alum heads
461 ci 600hp 400 based block No over the counter parts in this one, has alum heads, roller rockers, h-beam rods, steel crank ARP hardware, complete assy with covers, SFI balancer and flex plate & 1050 Holley and elec race dist.
ALL Performance levels and racing engine components can be upgraded/modified to suit individual use based on required HP expectations.
Upgrades include shaft mount rocker systems, alum block or rods. Cyl head, rotating assy, compression ratio/piston design.
HP expectations can only be realized/achieved with proper components ie : carb & cfm, int. manifold, ignition components, quality headers. Internal parts must be of highest quality to ensure long lasting, trouble free enjoyable/durable performance from your engine.
One year limited warranty on level 1-5 engines.
For more information on warranty on an individual engine application : Contact
Shipping arrangements made at time of purchase.
Location : Richmond British Columbia Canada 604-241-8084 11 am - 4 pm Pst.
Richmond, British Columbia, Motorsports, BC Drag Racing , Performance, Racing, Engine, Used Parts.Car Parts,Truck Parts, Auto Sales, Copyright 2005, 2008
Site Navigation 
